How to Make a Hoverboard Prop

This Is a fun prop to have and to make videos with

-go to next step to start making it

-Old Skate Board

-Silver and Gold spray paint

-Green bottled paint(i used bottled paint but you should use green spray paint to get done quicker)

-2 CD's

-2 Jenga blocks and 2 jumbo Popsicle sticks

-A stretch able belt

-And a cardboard circle a bit bigger then a CD

-First spray paint the skate board silver.

-while that is drying spray paint the 2 CD's ,2 Jengas,And cardboard circle gold

-After that paint the Popsicle sticks and the white side of the belt green with the bottled paint.

-on the front of the board when its dry paint a green line diagonally across the board.do same on the back of the board.

-when all of that is dry size the belt around the cardboard circle so it would fit your foot.

-after sized glue it all the way around the circle.make sure the green side is upward.

-Now glue it on the back top part of the board.tilt it a little bit to the right when gluing it on.

-Glue the sticks in the middle of each side on the bottom.

-glue to jengas in the middle like i did.

-Now glue the 2 CD's on the bottom where the trucks would be.

-it should look like mine.

You are now all done.Enjoy your fun and cool prop.Show it off or just display it.Try to make it different.make it your own way.Be creative.