How to Make a Hammock/swing

by lore.dedobbeleer in Outside > Backyard

12683 Views, 71 Favorites, 0 Comments

How to Make a Hammock/swing

548dac20d535cffbf00000ce.jpeg

In this Instructable you will learn to make a portable swing, that you can turn into a hammock and vice-versa. Easy to take with you when you go out for a walk in the park or forest

Sewing the Loops.

Stap 1hangmat.jpg

Cut out 10 strips of fabric (9cmx27cm).

Fold the short sides and sew with a zigzag stich, so you obtain clean sides.

The next thing you do, is folding the piece of fabric in two (long side). Then sew again with a zigzag stich. When finished, turn it inside out.

And now repeat this until you have 10 pieces.

Sewing the Edges of the Fabric

10822318_10204185165166543_1260809616_n.jpg
10850826_10204185176206819_1975107791_n.jpg
10833972_10204185366491576_2052878297_n.jpg

Take a large piece of fabric (2,00m-1,50m).

Fold the long sides double, for about 3cm, pin it up and sew it.

Than take the short sides and fold them triple, so you have nice looking edges.

Make sure you let some space at one of the sides where later on the nylon will get. (See drawing)

Attach the Loops

10822180_10204185177326847_1812782776_n.jpg
10822196_10204185176526827_347905958_n.jpg

Sew the loops one by one at the short sides (5 on each side). To make sure it will be strong enough, sew on 2 places.

Start in the middle and make sure that they are at the same distance.

The Nylon

10822239_10204185164886536_1123511990_n.jpg
10836183_10204185163606504_613284247_n.jpg
10833972_10204185366491576_2052878297_n.jpg

Take a piece of braided nylon and put on 2 cord stoppers.

Than put the nylon in the fabric as shown in the drawing (red line) and sew a few times over the end of the nylon to make sure that it's stuck.

The Rope

20141214_114234[1].jpg
20141214_114217[1].jpg

Now its time to prepare the rope that will be attached on the branch.

I took a rope from 20m and cut it in the middle. So you have 2 ropes from 10 meters, one for each side.

Than take 2 carabiners and attach them to the end of the ropes.

The last thing you have to do is making some loops which are at an equal distance from each other (I took 30cm between each loop). By doing this last thing you make sure you can hang the swing in different branches at different heights.

How to Attach the Rope to a Tree.

Throw the rope

Throw the rope over the branch as you cas see in the movie. When the rope is hanging over the branch, create loops in order to lowering the rope .

Attach the Loops to the Rope.

549045072f7cc671a4000167.jpeg
5490451e2f7cc630be0000d4.jpeg
549045322f7cc630be0000d5.jpeg
DSC_0005.JPG

Take the loops of the hammock together and slide them over the carabiner. Take a loop of the rope and click it with the carabiner. Do this on both sides and your hammock is ready to lie in.

(When there is no loop at the desired height you can easily create one extra.)

Turn It Into a Swing.

DSC_0015.JPG
548dac20d535cffbf00000ce.jpeg
Swing
5490486a2f7cc6a1140000de.jpeg

Just slide the cords closer together, hold the fabric and pull on the white nylon rope.

Step 6-8 in One Video.

Swing