How to Make a Creepy Mask at TechShop
by jlburton in Craft > Costumes & Cosplay
7158 Views, 17 Favorites, 0 Comments
How to Make a Creepy Mask at TechShop
This is an instructable on how to vacuum form a creepy mask. What you you need:
A TechShop membership
A vacuum former SBU Class
A Piece of acrylic
A mold of yours face, or someone else's creepy mug.
A person to creep on.
Make sure you Take the Vacum forming class so you know how to use the vacum former!
A TechShop membership
A vacuum former SBU Class
A Piece of acrylic
A mold of yours face, or someone else's creepy mug.
A person to creep on.
Make sure you Take the Vacum forming class so you know how to use the vacum former!
Step Number One.
Place your mold on the vacuum former & lower the bed.
Step Two
Place your acrylic on the vacuum former.
Set your heating zones! You will have to play around with the heating to make sure your material is good to go.
Set your heating zones! You will have to play around with the heating to make sure your material is good to go.
Step 3
Vacuum form that sucker!
Step 4
Pop it out!
Now You Got the Beginnings of a Creepy Mask.
Cut Out the Mask Part
Measure your mask and make an illustrator file of an oval where the face is located on your material.
laser cut that sucker outta there!
laser cut that sucker outta there!
Not You Have a Creepy Mask!
Go decorate and get creepy!