How to Make a 9mm Para Bullet Lock Bar Stabilizer
by Unboxingexperience7 in Workshop > Knives
4868 Views, 26 Favorites, 0 Comments
How to Make a 9mm Para Bullet Lock Bar Stabilizer
All you need is
- a knife with lock bar stabilizer (e.g. Strider SNG)
- an empty 9mm bullet shell
- a drill
- a hacksaw
Cut and Drill the Empty Bullet Shell
- cut the bullet shell (use a hacksaw)
- drill a hole in the middle of the shell bottom
- replace the original lock bar stabilizer