Modular 3D Origami Swan

In this project you'll see how to make a 3D Origami Small Swan with approximately 205 origami pieces.

This model is made from :

- around 69 green pieces ( this pieces are made from rectangles of paper with dimensions of 6 cm x 9 cm )

- around 114 white pieces ( this pieces are made from rectangles of paper with dimensions of 6 cm x 9 cm )

- around 22 orange pieces ( this pieces are made from rectangles of paper with dimensions of 6 cm x 9 cm )

To see how to make an origami piece you can go to this Instructable :
How to make 3D Origami Pieces

or you can watch this video:

1) Take 3 white pieces and connect them like in the first photo.Make six groups of white pieces.

2) Take 4 green pieces and connect them like in the third photo.Make six groups of green pieces.

Connect the groups together!

Complete the third row with white pieces.

On the 4th row you will need to put this pieces in order:

Begin with one green piece like you see in the first photo.

Continue with 2 white+1 green+2 white...Till you finish the row

On the 5th row you will need to put this pieces in order:

Begin with two green pieces like you see in the first photo.

Continue with 1 white+2 green+1 white...Till you finish the row.

On the 6th row you will need to put this pieces in order:

Begin with one green piece like you see in the first photo.

Continue with 2 white+1 green+2 white...Till you finish the row

Focus on the photos to see how to put the pieces!

1st row: 2 white pieces+1 green piece+2 white pieces

2nd row: 1 white piece+2 green pieces+1 white piece

3rd row: 1 white piece+1 green piece+1 white piece

4th row: 2 white pieces

5th row: 1 white piece

Focus on the photos to see how to put the pieces!

You will need to reverse the direction of the pieces as you see in the photos.

1st row: 2 white pieces+1 green piece+2 white pieces
2nd row: 1 white piece+2 green pieces+1 white piece

3rd row: 1 white piece+1 green piece+1 white piece

4th row: 2 white pieces

5th row: 1 white piece

Cover the last row with 13 green pieces

Cover the last row with 15 white pieces.

Covere the last row with 21 orange pieces

Make the neck with 15 white pieces and one orange.

Connect the neck with the body

Well now you know how to make a 3D Origami small Swan.

If you liked this project, perhaps you'll like some of my others.

Check them out at:

https://www.instructables.com/member/Giulia+Art