How to Wrap a Present

by Comp101 in Craft > Paper

128292 Views, 7 Favorites, 0 Comments

How to Wrap a Present

IMGP3299.JPG
Need to wrap a present for Christmas or a birthday? Not really sure how to make it look like someone over the age of four wrapped it? Here's how!

Find a Box

IMGP3301.JPG
Choose a box of adequate size to house the item(s) to be wrapped.

Collect Materials to Be Used

IMGP3302.JPG
Gather all items needed (Wrapping paper, scissors, clear tape, pen, bow and name tag or card).

Measure and Cut

IMGP3277.JPG
IMGP3276.JPG
Measure paper to fit around box. The measurement on the sides should be equivalent to the height of the box. Cut the paper that has been measured away from the roll. No paper should only be cut on side closest to the roll (not the top or bottom).

Fold, Tape, Turn

IMGP3278.JPG
IMGP3279 - Copy.JPG
Fold bottom edge up over top and tape to center of box. Turn the gift box around so that the side you have already taped is facing up.

Create Pleats and Tape

IMGP3281.JPG
IMGP3282.JPG
IMGP3283.JPG
IMGP3284.JPG
IMGP3285.JPG
IMGP3285.JPG
Fold up what is now the bottom edge. 1 cm past where other edge is taped create one pleat (small crease). Pull Tight. Holding onto pleat with middle finger and thumb create another pleat with forefinger and top of middle finger. Repeat as desired for more pleats. Secure all pleats with a single piece of tape across all of them at both ends of the box.

Flip Box

IMGP3286.JPG
Flip box over so the bottom is facing up.

Edges

IMGP3288.JPG
IMGP3289.JPG
IMGP3290.JPG
IMGP3291.JPG
On one of the open edge of the gift press in the sides of the paper and create creases. Press down what is currently the top edge of paper (but will be the bottom when you flip the package back over)  and tape. Cut off excess paper to make the edge even (if needed). Fold up what is currently the bottom of paper and secure well with tape. Be sure pleat is secured on edge. Repeat step on remaining open edge of the gift.

Flip Box and Add Bow

IMGP3292.JPG
IMGP3294.JPG
IMGP3295.JPG
Flip box back over to top (side with pleats). Place bow where desired on the package. Secure both edges of bow with tape.

Tag It

IMGP3296.JPG
IMGP3297.JPG
IMGP3299.JPG
Select and write on gift tag/card. Add tag/card to package (using tape if necessary).