How to Wrap a Gift Box

In this intractable you will follow our instructions to learn how to properly wrap a gift! All you will need to complete your wrapped gift is a gift box, wrapping paper, scissors, tape, and a bow. Warning: scissors can be dangerous to small children, parental supervision is advised. Now.... time to wrap your gift!!!!

· Wrapping paper

· Box

· Tape

· Scissors

· Bow

Roll out wrapping paper design down.

Place box in the center of rolled out paper.

Cut the paper along the roll side with the outlined squares and cut along a dotted line. Leave enough paper to overlap gift.

Fold paper over box to meet at the middle. If necessary trim the paper so that the two sides just overlap each other. Make sure to pull paper tightly so that there is no open space between the wrapping paper and the box.

Pull paper tightly to overlap at the center of the box then tape the overlapping paper down. Trim excess paper off the sides to leave roughly 2 inches of paper hanging off.

On one side of the box, fold the excess paper to create a crease along the top.

On one side of the box, fold sides of paper inwards to create two 45 degree flaps.

Fold bottom flap up and tape to box.

Rotate the box and repeat step 6-8 on the other side

Remove adhesive and place bow on desired location.