How to Use KEYDIY KD-X2

Here show a guide on how to setup and use KEYDIY KD-X2 remote programmer.

Note:Press and hold the red side button of the KD-X2 until no words shows on the screen.No operation in 5 minutes,the device will automatically shut down.

1.Scan the QR code on the back of the device to download the Mobile
KD App,or search the Mobile KD in your App store to download it.Make sure the Bluetooth of your mobile phone is on and open the Mobile KD App.Keep the KD-X2 being powered on.

2.Click the “Bluetooth Settings” in the App first page,and then click to search,the unpaired device list will refresh the KD devices around.(Operate as the picture below).

There are two things you need to do after pairing the device.The first
is to upgrade your device firmware.Click “Update” button on the first page of Mobile KD App,then click “Upgrade KD device” to achieve update according to the instructions.(Operate as the picture below)

The second thing is to update the remote data.Click “Update” on the first page of Mobile KD App,then click “Online Updates” to achieve remote data update according to the instructions.(Operate as the picture above)

Article from:

How to Set up and Use KEYDIY KD-X2 Programmer