How to Use Detect Color TCS3200 With SkiiiD

A tutorial to develop Detect Color TCS3200 with skiiiD.

Launch SkiiiD

Launch skiiiD and select New button

Select ① Arduino Uno and then click ② OK button

*This is Tutorial, and we use Arduino UNO. Other boards(Mega, Nano) have the same process.

Click '+' (Add Component Button) to search and select the component.

① Type 'Color' on the search bar or find the Detect Color TCS3200 on the list.

② Select Detect Color TCS3200 Module

#4 then you can see ③ pin indication. (You can configure it.)

*This module has 8 pins to connect

skiiiD Editor automatically indicate pin setting *configuration available

[Default Pin Indication for Detect Color TCS3200] in case of Arduino UNO

GND: GND

OE: GND

S1: 2

S0: 3

VCC: 5V

OUT: 4

S2: 5

S3: 6

After configuring pins ④ click ADD button on the right below side

⑤ Added Module has appeared on the right panel

skiiiD Code is intuitive function-based codes. This is based on skiiiD libraries

getFrequency(

"Return the frequency of detected color corresponding to the variable 'color'.

In order to return the variable 'color', choose 1 from "red", "green", "blue" as the color of frequency.

Set the scale of the frequency as the variable 'scale' value. The default scale is 100."

getColor()

"According to frequency detected, return a color from "red", "green", "blue".

Set the scale of the frequency as the variable 'scale' value. The default scale is 100."

We are working on components and boards libraries. Feel free to use it and feedback us, please. Below is contact methods

email: contact@skiiid.io

Comments are fine too!