How to Tell Time...

This was a really simple project that turned out great.

• jig saw
• chop saw
• table saw
• drill
• 1 inch bit
• 2 screws
• 6 pallet boards
• square
• glue
• brad nailer
• stain
• polyurethane
• cricut/ stencil
• tape measure
• pencil

For this step I used a 16 inches piece of pallet wood made a mark at 2" 6" 10" and 14" and 16". I then drilled a 1 in hole at the 2,6,10,and 14 cutting the 16 mark flush. using a square i marked the lines of the holes. cut using table saw.

I place 2 pieces of wood 16" on center apart and glued and nailed the 30 inch pieces of wood cutting of the excess using a jig saw.

I used a wine glass as a reference to gage the space needed so the glass would not hang off the bottom. Using screws and glue i secured it to the base.

Pick you stain or paint color and make it happen allow time to dry

I choose a storybook font and place them top center.

I put the wood 16 inches on center to allow it to be attach to wood studs. I also used wire with eye bolts to allow it to be hung.

I used small 1 inch hooks to hold the coffee mugs i used 1 for reference to get the spacing required to hang 4 mugs.

I have made 6 of these and sold them fast!! have fun