How to Make a Shopper Bag From Used Banner
by Vadimovna_makes in Craft > Fashion
941 Views, 7 Favorites, 0 Comments
How to Make a Shopper Bag From Used Banner
![final03.jpg](/proxy/?url=https://content.instructables.com/F7I/DF07/K1Z2O1EL/F7IDF07K1Z2O1EL.jpg&filename=final03.jpg)
This is bag for carrying artist materials: A3-size paper and large number of color makers, liners and pencils
Collect Ideas
![moodboard.jpg](/proxy/?url=https://content.instructables.com/FVL/LN7I/K1Z2OCDS/FVLLN7IK1Z2OCDS.jpg&filename=moodboard.jpg)
Types of bags, accessories, pattern example
Create a Pattern
![bag_pattern_21091019.gif](/proxy/?url=https://content.instructables.com/FND/TCEF/K1Z2O1CO/FNDTCEFK1Z2O1CO.gif&filename=bag_pattern_21091019.gif)
MAIN SIZES: BAG HEIGHT = 45 cm, BAG WIDTH = 40 cm, POCKET WIDTH = 11 cm, POCKET HEIGHT = 16 cm, BAG DEPTH = 16 cm, BAG HANDLE WIDTH = 5 cm, BAG HANDLE HEIHGT*** = 38.5 cm (above bag edge, suitable for people taller than 180 cm), DISTANCE BETWEEN BAG HANDLES** = 11 cm
ADDITIONAL SIZES: save for top edge of the bag* = 3.5 cm*2 = 7 cm, save for side edges of the bag* = 2 cm, bottom cutout1 = 10 cm, save for bottom edge* = 2 cm, save for top edge of the pocket* = 2 cm*2 = 4 cm, save for side connections between the pocket and the bag* = 2 cm
*** BAG HANDLE consists of two parts - a straight section and a rounding, the length of which is equal to ¼*pi*distance between bag handles
** DISTANCE BETWEEN BAG HANDLES should be less than the width of the bag bottom
* from each side
Select Materials
![step1.jpg](/proxy/?url=https://content.instructables.com/F1K/Y9BC/K1Z2O1GD/F1KY9BCK1Z2O1GD.jpg&filename=step1.jpg)
Materials used: used banner (cleaned before use), cord, elastic
Сut Out the Details From the Used Banner
![step2.jpg](/proxy/?url=https://content.instructables.com/FO2/MV7L/K1Z2O1I6/FO2MV7LK1Z2O1I6.jpg&filename=step2.jpg)
![step4.jpg](/proxy/?url=https://content.instructables.com/FMA/0U3T/K1Z2O1LV/FMA0U3TK1Z2O1LV.jpg&filename=step4.jpg)
![step5.jpg](/proxy/?url=https://content.instructables.com/F85/KIC8/K1Z2O1LZ/F85KIC8K1Z2O1LZ.jpg&filename=step5.jpg)
Cut out bag and pocket. Draw bend and connection lines
Сut Out the Details From the Cord
![step3.jpg](/proxy/?url=https://content.instructables.com/FBC/NZSY/K1Z2O1K0/FBCNZSYK1Z2O1K0.jpg&filename=step3.jpg)
![step6.jpg](/proxy/?url=https://content.instructables.com/F1A/5DNG/K1Z2O1NT/F1A5DNGK1Z2O1NT.jpg&filename=step6.jpg)
Cut out 4 details for hadles and 3 details for button/buttonhole
Check
![step7.jpg](/proxy/?url=https://content.instructables.com/F33/WSWI/K1Z2O1PL/F33WSWIK1Z2O1PL.jpg&filename=step7.jpg)
Сheck the presence and joining of parts
Edge Processing
![step8.jpg](/proxy/?url=https://content.instructables.com/F6R/NPHN/K1Z2O1RD/F6RNPHNK1Z2O1RD.jpg&filename=step8.jpg)
Stitching the top edge of the bag and top and bottom edges of the pockets
Button Place and Buttonhole Processing
![step9.jpg](/proxy/?url=https://content.instructables.com/F3E/BCBP/K1Z2O1RF/F3EBCBPK1Z2O1RF.jpg&filename=step9.jpg)
Stitching a cord for attaching buttons and a buttonhole (cord on the outside and inside the bag)
Handles Processing
![step10.jpg](/proxy/?url=https://content.instructables.com/FO2/KU61/K1Z2O1T8/FO2KU61K1Z2O1T8.jpg&filename=step10.jpg)
Stitching the handles (cord on the outside and inside the bag)
Join the Side Joints
![step11.jpg](/proxy/?url=https://content.instructables.com/FF2/0OBU/K1Z2O1V0/FF20OBUK1Z2O1V0.jpg&filename=step11.jpg)
Stitching side joints (at both sides)
Finalize the Bottom of the Bag
![step12.jpg](/proxy/?url=https://content.instructables.com/FID/75OB/K1Z2O1V1/FID75OBK1Z2O1V1.jpg&filename=step12.jpg)
Stitching the joints that make up the bottom of the bag (at both sides)
Connect the Handles
![final03.jpg](/proxy/?url=https://content.instructables.com/FBN/RC90/K1YJVCI6/FBNRC90K1YJVCI6.jpg&filename=final03.jpg)
Stitching the handles, connecting the slings located on one side of the bag (front and back)
Finished Bag
![final02.jpg](/proxy/?url=https://content.instructables.com/FDH/41LX/K1Z2O1CT/FDH41LXK1Z2O1CT.jpg&filename=final02.jpg)
![final01.jpg](/proxy/?url=https://content.instructables.com/FD2/SLZU/K1Z2O1CQ/FD2SLZUK1Z2O1CQ.jpg&filename=final01.jpg)
DONE!
Add Details
![final04.jpg](/proxy/?url=https://content.instructables.com/FD1/FAQ0/K2262AB3/FD1FAQ0K2262AB3.jpg&filename=final04.jpg)
For example, decorate with buttons, stripes, badges or something else...