How to Set Up Vinyl Record for Listening
by marcmoretti in Living > Music
51 Views, 0 Favorites, 0 Comments
How to Set Up Vinyl Record for Listening
Playing vinyl is a classic and fun way to play your favorite music. Whether you're new to records or just need a refresher on what to do, this simple and straight to the point guide will walk you through the basic steps to get your record spinning smoothly and safely.
Supplies
- A record player (turntable)
- A vinyl record
- Speakers (either built in or external)
- Power source
- Record cleaning brush or cloth
Put Your Record Player on a Flat Surface
Make sure that it's leveled and stable to prevent skipping.
Plug in the Record Player
Connect it to a power outlet if needed.
Turn on the Record Player
Use the power switch or knob to start.
Lift the Dust Cover
Open it gently or remove it fully if needed.
Choose a Vinyl Record to Play
Hold it by the edges to avoid fingerprints or scratches.
Place the Record on the Turntable
Center the hole of the record over the spindle.
Set the Speed (33 or 45 RPM)
Most LPs use 33 RPM; check your record label first.
Lift the Tonearm Carefully
Use the lever if your player has one, or lift gently by hand.
Move the Tonearm Over the Edge of the Record.
Lower the needle slowly onto the outer groove.
Enjoy the Music!
Sit back and listen. Adjust volume or bass as needed.