How to Read Input Register Values of Modbus Slave Device in Raspberry Pi Pico W With TTL to RS485 Converter Using MicroPython

How to Read Input Register Values of Modbus Slave Device in Raspberry Pi Pico W with TTL to RS485 Converter using MicroPython

In today's industrial landscape, communication between devices plays a crucial role in automation and control systems. Modbus protocol stands out as one of the most widely used standards for this purpose. Leveraging the versatility of Raspberry Pi Pico W and the simplicity of MicroPython, we can seamlessly interact with Modbus slave devices. This guide will provide a detailed walkthrough of reading input register values from a Modbus slave device using Raspberry Pi Pico W, paired with a TTL to RS485 converter, all within the MicroPython environment.

Before delving into the tutorial, ensure you have the following components and prerequisites in place:

1. Raspberry Pi Pico W.
2. A Modbus slave device or Simulator (e.g., PLC, sensor).
3. TTL to RS485 converter.
4. MicroUSB cable for Pico.
5. A computer with Thonny or another MicroPython IDE installed.
6. Basic knowledge of Python and Modbus protocol.

Setting up the hardware involves establishing connections between Raspberry Pi Pico W, TTL to RS485 converter, and the Modbus slave device:

1. Connect the TTL to RS485 converter to Raspberry Pi Pico W
2. Establish connections between Pico's UART pins (TX, RX) and the corresponding pins on the converter.
3. Connect the converter's A and B terminals to the RS485 lines of the Modbus slave device.
4. Power up Raspberry Pi Pico W using a microUSB cable connected to your computer.

Before proceeding, we need to ensure the necessary libraries are installed for communication with the Modbus slave device:

1. Open Thonny or your preferred MicroPython IDE.
2. Install the 'micropython-modbus' library by following this guide [Watch]

Now, let's write the code to read input register values from the Modbus slave device:

import time
from machine import Pin, UART
from umodbus.serial import Serial as ModbusRTUMaster

# Define the pins for Modbus communication
rtu_pins = (Pin(0), Pin(1))

# Define the starting address to read from
starting_address = 0

# Define the quantity of registers to read
qty = 3

# Initialize Modbus RTU Master
host = ModbusRTUMaster(baudrate=9600, data_bits=8, stop_bits=1, parity=None, pins=rtu_pins, ctrl_pin=None, uart_id=0)

# Continuous reading loop
while True:
    try:
        print('INPUT REGISTER request test.')
        print('Reading qty={} from starting address {}:'.format(qty, starting_address))

        # Read input registers from the slave device
        values = host.read_input_registers(slave_addr=1, starting_addr=starting_address, register_qty=qty, signed=False)

        # Print the result
        print('Result: {}'.format(values))

    except Exception as e:
        print('An error occurred:', e)

    # Wait for 5 seconds before the next reading
    time.sleep(5)

To ensure that our setup is functioning correctly, we can perform a simple test:

1. Connect Raspberry Pi Pico W to the Modbus slave device via the TTL to RS485 converter.
2. Run the script on Raspberry Pi Pico W.
3. Verify that the input register values are correctly read and displayed on the console output.
4. Optionally, perform additional tests by modifying the script to read different input registers or quantities of registers.

In this comprehensive guide, we've explored how to utilize Raspberry Pi Pico W and MicroPython to communicate with Modbus slave devices using a TTL to RS485 converter. By following the steps outlined above, you can seamlessly read input register values from Modbus devices, empowering you to integrate Raspberry Pi Pico W into industrial automation and control systems with ease. Experiment, explore, and innovate with this powerful combination of hardware and software!