How to Properly Do a Burnout

Hi. My name is Chandler Hanson. I help people get the attention of crowds the best way ever. Today, I am going to show you how to properly do a burnout. I have 7 easy steps to give the crowd attention getting tool. Knowing this will help people get the respect of others and also have fun.

Before we get started. We need a few things to grab before I can start with the demonstration. Our list of tools that are needed to achieve the demonstration are either an impact or breaker bar to loosen the lug nuts. A socket for taking the lug nuts off the vehicle which will be a 13/16-inch-deep socket. In addition to that, we are going to need some junk tires that are not road worthy and water if the vehicle doesn’t have power to spin tires. 

 First step is to loosen the lug nuts on the vehicle using either an impact or a breaker bar. Most vehicles have a breaker bar somewhere in the trunk or inside. Second step is to remove all the lug nuts. Jack up the vehicle so both rear tires are off the ground and take tires off. 

Second step is to remove all the lug nuts. Jack up the vehicle so both rear tires are off the ground and take tires off. 

The third step is going to be finding the tire that has the most amount of tread, but not something that won’t be used again on the road. People tend to find these types of tires online like Facebook marketplace or craigslist. Others can usually go to tire shops and find some in a pile where they will sell them cheap. In this case, I have the original tires for the pickup I’m using because they are just a spare set. The smaller the tire, the more it will spin. 

Fourth step is to mount the tires that you have found and place them on the vehicle and place the lug nuts on the studs and get them started. let the jack down to allow the tires to touch the ground so the wheels can be torque. Then use either an impact or breaker bar to get them tight. Find the torque spec for the vehicle. Most people can either find this in the owner’s manual or online. Grab a torque wrench and set it to the required torque for the tires. 

Step five which is most critical. Get rid of the air filter. Remove the four screws from the air filter box. By removing the filter, more air is flowing into the intake so more power is being produced. 

Step six. Finding the suitable location that is very private to the public or where cops will not be around. It is very frowned upon. Doing it in a concrete pad like a driveway or garages have smoother surfaces help with the spinning of the tires. 

Step 7 will be having the perfect foot work when working the brake and throttle pedal. Now it’s all about the feel. Place one foot on the brake and other on throttle pedal. Give it all the throttle and while the other foot is on the brake. Slowly release brake until the tires are spinning. Let it rip!!!!!!!!!!!!!!