How to Program Led Strip With Trinket Pro

This is a tutorial to program led strip with trinket pro.

The materials are:

• Trinket pro 5v.
• Usb micro-B plug.
• Wires.
• PC.
• Led strip.
• Battery 3.7 - 5v.

Take to wire and connect the power.

We proceed to do all the connections like we see in the picture.

Now we put the trinket in bootloader mode and upload the program.

The program can be download here: https://learn.adafruit.com/adafruit-neopixel-uberguide/basic-connections

Connect the led strip to the board.

Disconnect the cable and connect the battery.

Finally we can see the led strip is turn on.