How to Make an Up-cycled Lamp

by The KAUST School in Circuits > Reuse

640 Views, 2 Favorites, 0 Comments

How to Make an Up-cycled Lamp

Screen Shot 2013-05-18 at 2.52.26 PM.png
This is a brief, step to step guide on how to make an up-cycled lamp. this lamp was inspired by tribal setting and was created with already available material. However, the lamp stand is from Ikea along with the light bulb. 

Photo on 5-4-13 at 2.38 PM #3.jpg
Photo on 5-4-13 at 2.38 PM.jpg
  1. Collect the hangers
  2. Bend them out
  3. Put them together in a cross pattern

Photo on 5-4-13 at 2.38 PM #4.jpg
Photo on 5-4-13 at 2.38 PM #5.jpg
4. Cut off the hooks on the hangers
5. Attach the hangers to the base of the lamp (stand)
6. Use the tape to put them together and make them stable. A

Photo on 5-4-13 at 2.46 PM #2.jpg
Photo on 5-6-13 at 3.02 PM.jpg
7. Get a used up fur coat
8. Cut the fur off
9. wrap it around the base of the lamp stand

Photo on 5-6-13 at 3.02 PM #2.jpg
Photo on 5-6-13 at 3.03 PM #3.jpg
Photo on 5-6-13 at 3.03 PM.jpg
10. Gather feathers from used up duster
11. Separate them
12. Trim the bottoms down to a usable length
13. Stick them on to the top of the lamp so that they form a sort of canopy. 

Photo on 5-6-13 at 3.23 PM.jpg
Photo on 5-6-13 at 3.29 PM #2.jpg
Photo on 5-6-13 at 3.29 PM #3.jpg
Photo on 5-6-13 at 3.42 PM.jpg
14. Get a Belly dancing belt
15. Cut it up into a thin strip
16. Wrap it around the base of the lamp

Screen Shot 2013-05-18 at 2.52.26 PM.png
AND ITS FINALLY DONE !