How to Make a Wooden Sword
by martinooouuu in Craft > Costumes & Cosplay
411 Views, 1 Favorites, 0 Comments
How to Make a Wooden Sword
![Screenshot 2020-02-06 at 10.37.47.png](/proxy/?url=https://content.instructables.com/FS0/SRII/K6ABHLG5/FS0SRIIK6ABHLG5.png&filename=Screenshot 2020-02-06 at 10.37.47.png)
Materials and tools
Wooden planks x3 (1 Wooden plank about 4cm - 2cm - 83cm, Another plank about 32cm - 50cm - 2cm, and another plank about 23cm - 2cm Hot glue Hammer & nails Saw
![Screenshot 2020-02-06 at 10.39.39.png](/proxy/?url=https://content.instructables.com/F1D/0Z66/K6ABHLKA/F1D0Z66K6ABHLKA.png&filename=Screenshot 2020-02-06 at 10.39.39.png)
Cut a triangle on the tip of an 83cm wooden plank like this one:
![Screenshot 2020-02-06 at 10.43.38.png](/proxy/?url=https://content.instructables.com/FXN/7JLF/K6ABHLMG/FXN7JLFK6ABHLMG.png&filename=Screenshot 2020-02-06 at 10.43.38.png)
Cut two 3cm by 12cm cuboids from the 50cm plank, the cuboids should look like this:
![Screenshot 2020-02-09 at 08.19.29.png](/proxy/?url=https://content.instructables.com/FW2/3EBI/K6E5OXWN/FW23EBIK6E5OXWN.png&filename=Screenshot 2020-02-09 at 08.19.29.png)
Take a 23cm wooden plank and cut it in half so you gave two 11.5cm planks, they should look like this:
![Screenshot 2020-02-09 at 08.19.45.png](/proxy/?url=https://content.instructables.com/FO1/9KCU/K6E5OXUH/FO19KCUK6E5OXUH.png&filename=Screenshot 2020-02-09 at 08.19.45.png)
glue the 12cm - 3 cuboids from step 2 in a T shape with hot glue, it should look like the picture
![Screenshot 2020-02-09 at 08.20.53.png](/proxy/?url=https://content.instructables.com/FBJ/97X7/K6E5OZ9M/FBJ97X7K6E5OZ9M.png&filename=Screenshot 2020-02-09 at 08.20.53.png)
Glue the T shape from step 4 onto the blade like this, also with hot glue:
![Screenshot 2020-02-09 at 08.21.05.png](/proxy/?url=https://content.instructables.com/FQK/RGN4/K6E5OXUF/FQKRGN4K6E5OXUF.png&filename=Screenshot 2020-02-09 at 08.21.05.png)
Glue the rectangles from step 3 onto the sword with hot glue like this:
![Screenshot 2020-02-09 at 08.21.18.png](/proxy/?url=https://content.instructables.com/FFQ/9CC5/K6E5OXUC/FFQ9CC5K6E5OXUC.png&filename=Screenshot 2020-02-09 at 08.21.18.png)
Place hot glue on the corners of the sword (marked in blue) to make it stronger and less probable to break.
![Screenshot 2020-02-09 at 08.21.30.png](/proxy/?url=https://content.instructables.com/FBC/KF82/K6E5OXYT/FBCKF82K6E5OXYT.png&filename=Screenshot 2020-02-09 at 08.21.30.png)
enjoy