How to Make a Wooden Fidget Spinner
by ethansocks8 in Living > Toys & Games
1106 Views, 1 Favorites, 0 Comments
How to Make a Wooden Fidget Spinner
![20190915_133108.jpg](/proxy/?url=https://content.instructables.com/FVW/Q39P/K0KUZJA8/FVWQ39PK0KUZJA8.jpg&filename=20190915_133108.jpg)
Hi! Today I'm going to teach you to make wooden fidget spinner! Thanks for reading!
Supplies
- Toothpick
- 2 popsicle sticks
Caps
![20190915_132225.jpg](/proxy/?url=https://content.instructables.com/FMI/UED0/K0KUZJEY/FMIUED0K0KUZJEY.jpg&filename=20190915_132225.jpg)
To make caps, just use your saw to cut circles out of the popsicle sticks. To make circles, trace the end of the other popsicle stick to trace a circle onto the other.
The Axle
![20190915_132203.jpg](/proxy/?url=https://content.instructables.com/F1F/LC9I/K0KUZJCT/F1FLC9IK0KUZJCT.jpg&filename=20190915_132203.jpg)
![20190915_132346.jpg](/proxy/?url=https://content.instructables.com/FOB/PMHS/K0KUZJG4/FOBPMHSK0KUZJG4.jpg&filename=20190915_132346.jpg)
![20190915_132218.jpg](/proxy/?url=https://content.instructables.com/FEZ/EBHF/K0KUZJE0/FEZEBHFK0KUZJE0.jpg&filename=20190915_132218.jpg)
For the axle, use a toothpick. On the body, drill a hole just big enough for the toothpick. Then, cut the toothpick so that it is short enough to fit in the hole and spin with hot-glued caps on it.
Hot-gluing
![20190915_133108.jpg](/proxy/?url=https://content.instructables.com/FVW/Q39P/K0KUZJA8/FVWQ39PK0KUZJA8.jpg&filename=20190915_133108.jpg)
Get your axle and hot-glue on of the circles on it. Then, put it through the hole in the body of the spinner after it dries. Then, very carefully, hot-glue the other cap onto the other side of the toothpick. Make sure you do this while the toothpick is in the hole.
Finished!
![20190915_133036.jpg](/proxy/?url=https://content.instructables.com/FZV/JY11/K0KUZJAG/FZVJY11K0KUZJAG.jpg&filename=20190915_133036.jpg)
![20190915_132728.jpg](/proxy/?url=https://content.instructables.com/F0C/BWBH/K0KUZJDO/F0CBWBHK0KUZJDO.jpg&filename=20190915_132728.jpg)
You're finished! Thanks for reading my instructable, I hope you liked it! Make sure to hit the vote button!