How to Make a Transforming Paper Ninja Star.

by jegonzalez656 in Craft > Paper

471 Views, 1 Favorites, 0 Comments

How to Make a Transforming Paper Ninja Star.

20200509_084031.jpg

How to make a transforming paper ninja star.

Supplies

8 post-its

20200508_232514.jpg

Take 1 post-it and fold it into a triangle.

20200508_232600.jpg

Unfold and make another triangle on the other side.

20200508_232638.jpg

Unfold again and fold in half to make a rectangle.

20200508_232721.jpg

Unfold one last time and along the line down the middle make 2 triangles.

20200510_162908.jpg

Fold in half again to make it look like an airplane without wings.

20200510_162556.jpg

Flip the airplane over and hold it at the bottom middle. Push/bend the back corner inward to where you're holding it. Now bring the 2 flaps together and flatten it.

20200508_233213.jpg

It should look like this so far.

20200509_083025.jpg

Repeat the same steps with the 7 other post-its.

20200509_083227.jpg

Once you have all 8 pieces take two and put one into the back slot of the other.

20200509_083248.jpg

Fold the tiny piece sticking out of the first one into the slot of the second one.

20200509_083416.jpg

Keep repeating until you make a completed circle.

20200509_084403.jpg

The completed circle should look like this.

20200509_083956.jpg

Hold circle from sides and slowly push inward.

20200509_084031.jpg

Keep repeating for all sides until a ninja star is formed.

20200509_084156.jpg

You can change back to the circle by slowly pulling out on all sides instead of pushing in.

20200509_083912.jpg