How to Make a Single Rubber Band Bracelet on Loom.

This is super simple to make. It takes me about 5 minutes tops.

•loom
•hook
•c or s clips
•rubber bands

You are going to start with the arrow facing away from you. Then, you're going to take color number 1 of your band and place it from the arrow to the 2 one on the left ( as seen in image 2) Next, take color number 2 and place it from where you last put your band and then to the 2nd one in the middle( as seen in image 3) repeat this process until you reach the end of the loom.

You are going to turn your loom around so that the arrow is facing towards you. Now take your hook and take the color underneath the last color and take it to the 2nd one in the middle.(as seen in images 2 and 3) Repeat this process until you reach the end of the loom.

Take your c or s clip and put on the end of you bracket. Now carefully take your bracelet off of the loom. Take your clip and connect it to the other end of the bracelet. Now your bracelet is ready to wear! I hope you enjoyed this instructable. Please let me know in the comments what bracelets you want me to make.