How to Make a Roll for Vinyls
by emills05 in Living > Life Hacks
1927 Views, 14 Favorites, 0 Comments
How to Make a Roll for Vinyls
![YDXJ5491.jpg](/proxy/?url=https://content.instructables.com/FA5/J2MA/ISCAXG8X/FA5J2MAISCAXG8X.jpg&filename=YDXJ5491.jpg)
This a tutorial to make a roll for vinyls.
Materials
![YDXJ5481.jpg](/proxy/?url=https://content.instructables.com/FTJ/QAYY/ISCAXEZT/FTJQAYYISCAXEZT.jpg&filename=YDXJ5481.jpg)
The materials are:
- Wood.
- Pvc tube.
- Drill.
- Table saw.
- Spade drill bit.
Holes
![YDXJ5482.jpg](/proxy/?url=https://content.instructables.com/F04/IKN4/ISCAXF3Y/F04IKN4ISCAXF3Y.jpg&filename=YDXJ5482.jpg)
![YDXJ5483.jpg](/proxy/?url=https://content.instructables.com/FXB/9B3G/ISCAXFB9/FXB9B3GISCAXFB9.jpg&filename=YDXJ5483.jpg)
![YDXJ5484.jpg](/proxy/?url=https://content.instructables.com/FL5/7YKL/ISCAXFDN/FL57YKLISCAXFDN.jpg&filename=YDXJ5484.jpg)
We proceed to make holes to the wood the same way like the picture.
Groove
![YDXJ5485.jpg](/proxy/?url=https://content.instructables.com/FTM/HOEQ/ISCAXFIJ/FTMHOEQISCAXFIJ.jpg&filename=YDXJ5485.jpg)
![YDXJ5486.jpg](/proxy/?url=https://content.instructables.com/F0L/R698/ISCAXFJE/F0LR698ISCAXFJE.jpg&filename=YDXJ5486.jpg)
Now with the table saw we make the groove.
Groove 2
![YDXJ5487.jpg](/proxy/?url=https://content.instructables.com/FSU/BHPZ/ISCAXFNF/FSUBHPZISCAXFNF.jpg&filename=YDXJ5487.jpg)
![YDXJ5488.jpg](/proxy/?url=https://content.instructables.com/FW7/FQ1Z/ISCAXFY4/FW7FQ1ZISCAXFY4.jpg&filename=YDXJ5488.jpg)
We repeat the previous step.
Stick
![YDXJ5489.jpg](/proxy/?url=https://content.instructables.com/FY0/3V1P/ISCAXG0C/FY03V1PISCAXG0C.jpg&filename=YDXJ5489.jpg)
Finally just put together the pieces of wood.
Ready
![YDXJ5490.jpg](/proxy/?url=https://content.instructables.com/FCI/B5ED/ISCAXG0L/FCIB5EDISCAXG0L.jpg&filename=YDXJ5490.jpg)
Now is all ready just put the pvc in the holes, and we have the roll.