How to Make a Rechargeable Magnetic Water Mixer (vortex Mixer)

Stirring, one of the most boring work of life..
Let's make it fun just out magnets in the cup/glass and toggle the switch and then boom your syrup/solution is ready , but be sure to remove the magnets
Caution : Do it at your own risk I will not be responsible for any loss to life or property

Supplies

1. 5v BLDC fan
2. Spdt/spst toggle switch
3. Wires
4. 18650 li-ion battery holder
5. 18650 li-ion battery
6. 4 Neodymium Magnets
7. Tp4056 charging Module
8. 5v step up module (optional)
TOOLS
1. Super glue
2. Soldering iron
3. Soldering wire
4. Flux (optional)
5. Hot glue
6. Hot glue gun(optional)

Make the Circuit

First make the Circuit to check if everything is working or not
You can make the connections by referring to the image mentioned above
Connections are pretty easy :)

Disassemble the Connections

Now disassemble the circuit and take the measurements of your components and select a suitable container for it

Make the Suitable Holes and Place the Components in Your Container

Now place your components in the container and make all the necessary holes needed

Rearrange the Connections

Now solder all the connections and add hot glue so the connections can be safe

Succes!

You did it you just built your own vortex mixer just put the magnets in the solvent add the solute toggle the switch and boom your solution is ready
Warning : replicate it at your own risk ,I will not be responsible for any loss to property or life