How to Make a Poster That Can Also Light Up! (using Arduino Uno)

by 282359 in Circuits > Arduino

228 Views, 0 Favorites, 0 Comments

How to Make a Poster That Can Also Light Up! (using Arduino Uno)

20211202_113416.jpg

Create an artistic poster, while making it light up! (Preview, Arduino Uno is used, and so is coding).

Supplies

IMG-1265.jpg
  1. paper
  2. markers/paint/colored pencils
  3. LED lights
  4. cardboard
  5. ruler
  6. scissors

Cut the Cardboard

IMG-1268.jpg

Cut and Measure a piece of cardboard 5 inches by 4 inches.

Wrap the Cardboard

IMG-1269.jpg

Wrap the piece of cardboard with the piece of paper so that it looks like a canvas.

Draw Your Design

20211201_114320.jpg

Draw/ sketch your design on the poster.

Color Time!

20211201_121435.jpg

Fully Paint/ color your poster.

Program

20211202_162656.jpg

Program the LEDs however you want using the C++ programming language, (pinMode, digitalWrite, delay) codes

Mark

20211201_121648.jpg

Mark where you want to place the LEDs.

Details

20211201_121431.jpg

Add any extra details you think you should add.

Extra: Add the Border and Tape It Up!

20211202_113416.jpg

Cut out another 5 inches by 4 inches piece of cardboard for the back, and also cut out strips of cardboard for the sides. Then tape it all up ( including the front so it's nice and shiny.