How to Make a Paper Gun That Fires

This instructable will show you how to make a gun out of paper that fires, enjoy!

Supplies

Paper

Rubber band

Rolling

Roll a piece of paper until the end, then glue the flap to the already rolled paper.

Keep Rolling

Roll another piece of paper, about half the length of the first one.

Stick

You have to stick the half-rolled piece of paper on the full rolled one, right in the middle. I would have preferred to use tape, but since I didn't have any around, I used rubber bands.

The Trigger

Now, get a piece of paper, roll it up, and cut it about 3/4 size of the original paper. Now get a small piece of paper and fold it over the hole of your 3/4 roll of paper. Now insert it into the original paper's hole.

Rubber Band It

Get a rubber band and put it over the half rolled piece of paper. Now connect it to the trigger. This will allow the 3/4 piece of paper to get pulled back and then released push the bullet out of the gun.

Optional

This is a optional step. If you want to add a scope to your gun, just roll up a 1/4 piece of the original paper and stick it to the top with tape or what I used, rubber band.

Bullets

Now all you got to do is crumple up little pieces of paper and put them inside the gun. As soon as you will pull the trigger back, it will fire.