How to Make a Original Arena BEYBLADE BURST?

Hello. I'll show you how I did the arena for the game.

Sorry for the quality of the text, my English is very bad.

I think you will like this article.

The Internet is gaining popularity BEYBLADE BURST.

Great original oren on sale was not found.

It was decided to make the arena itself.

The first thing that caught my eye was a satellite dish.The first thing that caught my eye was a satellite dish.

We will use it as a basis for the arena.

On a satellite dish, there are technical holes. It was decided to cover the holes with epoxy glue.

First, the technical holes must be sealed with a paper tape.

Next, prepare the epoxy glue, and fill in the holes.

For the manufacture of the bead will be used, corrugation for the pipe, it is light and soft.

In the original boron is painted yellow.

There was no suitable color, I had to paint.

The rest is to make the color of the arena dark gray.

At this stage, there was nothing difficult, just paint the arena with thin layers of paint.

This stage of the work was the most difficult.

It was necessary first to mark out with a pencil where the marking lines will pass. Then paste the paper tape and paint the frame.

Next we put the necessary colors.

The bands on the arena will be blue. Inside the circle will be red.

It was the most pleasant etym, for it was already possible to see the result of the work.

To ensure that the strikes on the arena were quiet, noise insulation should be pasted on the back of the arena.

We glue the side of the arena with conventional glue

Making the arena shot everything on video. All can be seen on the video.