How to Make a Mouse Droid Out of Cardboard
by Star Wars 1 in Circuits > Remote Control
1722 Views, 7 Favorites, 0 Comments
How to Make a Mouse Droid Out of Cardboard
This is how to make an RC mouse droid from Star Wars
Supplies
A long piece of durable cardboard
Scissors
Black duct tape
Markers
Black spray paint
An RC tiny car
Scissors
Black duct tape
Markers
Black spray paint
An RC tiny car
Drawing the Body
Now, you are going to draw the body. Make a rough sketch of the body and all of the dimensions. Sorry if mine is unclear. Use a ruler. It works best.
Assembling the Body
Now, cut out the body carefully with scissors and tape all of the corners together. Then, turn over the body and tape your rc car to the bottom. Make sure there is enough room for the wheels to turn.
Adding Details
On the mouse droid from Star Wars it has some ridges in the middle and some crowns on ether side. Make these decorations out of cardboard. I did not do ridges for the sides. I did just a square
Spray Paint
Take your droid and spray paint everything. Then your done! You can put your mouse droid to work