How to Make a Mosquito Trap

HOW DOES IT WORK?

• Mosquitoes will be attracted to accumulated water and lay their eggs in a piece of cloth for spawning.
• Once the mosquito larvae has hatched, they will drop into the water to become adults.
• When the mosquitoes are full grown, they will be too large to fly out and will be trapped inside by a T-shirt.

Watch the Video!

This movie which will be 3 months later after a trap is installed

As you can see on the picture the tools and ingredients are

• a bucket
• a T-shirt（black is better）
• a plastic bottle（500ml）
• a piece of cloth（30 * 50〜80mm）
• tape
• string

• scissors

• knife

• thumbtack or drill

Drape the T-shirt over the bucket and make a hole of about φ30mm at the center.

Cut the top off of a plastic bottle with a knife.

A bottle is fixed on a hole of a T-shirt with a tape.

Drape the T-shirt over the bucket and wrap the string around the bucket.

Make a hole for drainage in the upper part of a bucket with a thumbtack or drill.

A piece of cloth is installed in the opening of a plastic bottle for spawning.

Place these traps every where around your home

Watch the Video!!

This movie which will be 3 months later after a trap is installed