How to Make a Minimum OTG Connector
by a littlet in Circuits > Electronics
3337 Views, 26 Favorites, 0 Comments
How to Make a Minimum OTG Connector
In this electronic DIY project you will see how to make a minimal OTG connector at a very low cost. The OTG connector is a very practical tool that makes it easy to connect your Android phone for U disk expansion and mouse connection. You can make a more detailed production by watching the full production video.
Materials needed:
USB female
Mike plug
Heat shrinkable tube
Use tools:
Electric iron
The First Step Is to Prepare the Required Materials.
One USB holder, you can get it from the old device. Mike plug one
Second Step Component Welding
The USB socket and the Mike plug are soldered according to the drawing, and they can be fixed to the hole plate for soldering.
Third Step
Apply the finished product to the hot melt adhesive and heat shrink the sleeve to make the shape.
Last Step
Connect a USB flash drive or mouse for testing