How to Make a Mario Block Die

This is a fun project for anybody. Here is how you do it.

Here is a list of supplies you will need for this project.
1. Scissors
2. Tape or glue
3. Paper Bag
4. A Ruler
5. Silver of white Sharpie
6. Black Sharpie

You will need to make a sketch with your ruler and black sharpie. You can also use a pencil. Sketch what you see in the picture taken. Make sure each block is square with even measurements. If you make one square an inch in length than the other side needs to be an inch in length. Also sketch the ends of some of the squares as shown in the picture. Some of the marks are wrong so look at the cut out I have to get a better description.

Just cut out the outside of what you have traced.

Fold the edges shown in the picture.

Look at the picture for help. The question mark does not have to be perfect. If you do not want to draw you can just print off question marks that fit the block. You need to put the dots in the corners with your black sharpie and add numbers too if you want to.

Just tape it together. This might get hard, but it is not too hard. You can also use glue for this. I would use tape though because it is less messy.

In the end it looks nice. You can make two so you have dice to use. Hope you enjoy!