How to Make a Lever
In this instructacle, you will learn how to make a lever out of supplies you probably already have at home
Supplies
You will need:
- A strip of cardboard
- 3 paperclips
- Hot Glue Gun (tape works too)
- Scissors
Cut the Cardboard
Cut cardboard in half.
Cut the Cardboard
Take one half of the cardboard and cut it into thirds.
Glue the Cardboard
Glue (or tape) the 3 pieces of cardboard into a triangle.
Paperclips
Unbend all of the paperclips.
Glue the Paperclips
Glue 2 of the paperclips to each side of the other half of the cardboard.
Attach the Pieces
On the side of the cardboard, there are tiny holes. Put the paper clip through the hole, then push it through. Do the same thing when attaching it to the triangle.
Your Done!
Congratulations! You made your own lever!