How to Make a Lebathon!

This is where you'll find all you need to make a lebathon out of K'nex! Its powers:

• Slashers
• Punches
• Tail whips

Enjoy!

• Two white rods
• Three yellow rods
• Four grey/white mini rods
• Two red connectors
• Five mini green rods
• Two yellow connectors
• Two grey connectors
• One green connector

Take the two grey connectors and put them together. Then attach the head (a green connector) with a mini green rod. Then attach one of the white/grey mini rods to the body (the two grey connectors that were put together.) and attach a red connector to the white/grey mini rod as shown.

Then, on to the red connector, attach a mini green rod onto the red connector and attach another grey/white mini rod onto the red connector as shown.

With the green rod in place to connect the pieces together, put a yellow connector onto the mini green rod. Put another green mini rod onto the yellow so that it looks like the picture.

Put one of the yellow rods onto the remaining grey bit on the side you're working on for a hind leg, and attach the tail (a yellow rod on the back of the body) to the body.

Repeat all of those actions on the other side! There is more steps for that, so don't start working unless you know what you're doing perfectly!

Attach a white mini rod on the other front side of the body and put a red connector on the bottom of the white mini rod (front leg).

Put a mini green rod onto the middle bit of the red connector and attach a grey/white mini rod onto the bottom (to finish the front leg.).

Put the yellow connector onto the mini green rod and put a mini green rod on the other side as well.

Add the hind legs (yellow rods) and tail. You're done!