Leather Bag
You can have this acrylic pattern from here:
http://www.leathercraftpattern.com/Acrylic-templat...
Advice:
Leather: We advice 2.0mm (5oz) leather for surface, and 1.0mm (2.5oz) leather for lining, it needs about 25cm x 38cm leather for surface and 30cm x 90cm leather for lining.
Hardwares: We offer hardware kits.
Tools: If you are a new leather player, try to considerate to have tool kit here:
Cut All Pieces by Acrylic Pattern.
Paint Edge Oil on the Edges
Sew First Card Slot On, Only Sew the Bottom Stitching Line
Sew Other Card Slots On
Make Zipper of Inner Pocket
Make Zipper of Inner Pocket - Cut Off Redundant Elements, Install Bottom Stop and Slider, Install Top Stops.
It Needs 2 Pieces of Zippers, Glue Them on the Zipper Hole and Sew Around
Install Magnetic Button, Here I Add a Piece of Thick Paper to Strengthen the Soft Leather
Hollow the Hole for Inlay Leather
Thin the Edge of Inlay Leather and Sew It On.
Now We Begin to Sew Gussets On.
Finally Install Taps and Hardware On, the Bag Is Finished.
