How to Make a Jedi Comlink

This is my first instructable, and there has been a lot of confusion with it. Hope you like it!

• masking tape
• scotch tape
• floss box
• beading wire
• scissors

Unroll about an inch of beading wire from the spool.

Cut off the inch of wire.

Wrap some masking tape around the end of the antenna.

With scotch tape, tape the antenna onto the floss box.

It should now look like this.

Bend back the antenna so that the floss box top can open.

Rip the top of the floss box off. Then, bend the wire back upright.

It should now look like this.

Well, as the title says, open the floss box up.

Take the window piece out of the comlink/ floss box.

It should now look like this.

Put a layer of masking tape on the window piece.

Put the window piece back into the box and then close the box.

This is your final product.

This is your final Jedi com link with labels for all the pieces.

Hope you enjoyed this instructable!