How to Make a Horn Out of a Straw

This will teach you how to make a horn out of a straw and a cardboard tube. You can use it to annoy friends and family or just start a band and have fun!!!

You will need a straw, a cardboard tube, chipboard or thin cardboard, scissors, pencil tape, ruler, and a imagination.

Get the tube and put it on the chipboard or thin cardboard, trace it with a pencil then cut it out and put it on the top. Tape the piece you cut out on the top and measure it and put a dot were the middle is, poke a pencil through it then put your straw through the top. Do the same with the bottom and, let it stick out about 1 cm, note that if tube is to big for straw then cut the tube. Near the bottom of the straw on the side put a hole and cover the bottom so no air comes out.

Gat your straw and bite about the top inch so it is flat then cut the top so it is like the tip of a triangle. ( if it does not work then either make the hole bigger or smaller.)

Now all you need to do is cut some holes on one side of the tube and now you made a horn with reusable things.
Congratulations!!! YOU HAVE FINISHED
(By the way this is my first instructable)

Decorate, color, paint, do anything!!!