How to Make a Hamster Wheel

I made a hamster wheel for my hamsters because the one's my mom buy are loud so i made this one so it would be quite

1. plastic container
2. hard drive spinner
3. hot glue
4. paint
5. Styrofoam
6. scissors
7. soldering iron
8. floral wires
9. and paper
10. wood glue and water to paint the Styrofoam

first I traced the spinner on the container then got my soldering iron and soldered the hole in container than I used sand paper and sanded it down

I sanded the containuer and then just started painting and let it dry and you can also decorate it

i put foam on the bottom where the hole is and I got the hot glue gun and glued it on the foam

for the stand I'm using Styrofoam and I'm going to make a mixture of wood glue and water and put it on the Styrofoam to be able to paint it and then after its dry I'm going to paint it.

you will glue the Styrofoam to the back of the hard drive spinner mine isn't standing up so i cut a hole in the bottom of the stand and then put rocks in it.

this is the result