How to Make a Hammer

I made a hammer which is a tool that can be used in blacksmith and to destroy things, the reason I made it is because I like the idea of blacksmith.

• A computer
• autodesk inventor
• a 3D printer

you want to click start 2D sketch and make a rectangle with the dimension (on the top bar of sketch) and top 12in and length 8in.

Then you want to extrude it by 8in (On the tap of 3D model)

You then want to click on "fillet" and fillet the both sides of the rectangle by 1.2 in.

Now you want to fillet at 4 angles of the rectangle by 0.5 in

You want to dimension the circle with the sides of the rectangle by 4.5 on the left side and the bottom 3.45

Make 2 rectangles with an area of .400 in and 1in apart from the edge of the rectangle and cut (extrude) by 1in.

You want to make a circle in the middle and dimension it by 2.400in and then extrude by 12.