How to Make a HOT Blade

Some times cutting plastic to make custom designs, creating enclosure for your new project or creating a hole in your of the self plastic enclosure to pass cables; can be tough with conventional tools like saw and drills. Here is a cheap and easy solution for this issue.

Here is a quick video, which will take you through all steps in few minutes.

Click here to watch it on youtube

Here is the list of Items needed to make this HOT Blade:

• A cheap solder iron which uses screw to mount it's solder bit . (This is important, other soldering irons won't work, we specifically need one with screws)
• Blade knife
• Screw driver

look up Attached images in case of doubt.

Follow these steps to assemble HOT blade:

1. Remove blade form the blade knife. It's really simple, just take out top cap and slide the blade out.
2. Brake off extra segments in blade to achieve required size of blade, using groove in the cap.
3. Remove soldering bit form the solder iron by unscrewing the screw. (Do not loose this screw)
4. Mount blade on solder iron using screw.
5. Plug your solder iron in power plug and there you have your hot blade.

You can have a look at these steps in video attached in step 1.

Thanks for your time.