How to Make a Great Spider Shock Mount for Any Microphone

Spider Shockmount is designed to provide microphones with enhanced isolation from mechanical noise.

Get a ring (strong) or make one out of anything with a big diameter such as from pvc pipe.. I got one from junk yard made of aluminum.

Make four holes in the ring in cross....

Using steel wires , make the exact shape...i made it about 5 cm from the center circle to the end.

Attach these four steel wires with the ring using nut and bollts.

Make 4 more holes in the ring with smaller diameter in cross.

Using this steel roll , cut a strip of about 4 cm. Make a hole into the center of it. Bend it from the sides as shown. I also made them round. You can do it without making it round.

Attach the strips by nut and bolts.

To attach your microphone into the spider shock mount you have to attach a holder clip to the smaller diameter with a curled / bended steel strip as shown in the figure.