How to Make a Google Cardboard

by Makeera in Circuits > Gadgets

1927 Views, 15 Favorites, 0 Comments

How to Make a Google Cardboard

googlecardbard20.jpg

Google has created an amazing way to access the virtual world around you, Google Cardboard. I'm going to teach you how to make one of these with just a template, cardboard, scissors, glue and tape. Let us get right into it!

CUTTING OUT

First, you need to cut your template into the relevant pieces. The template, that we were provided with, had darker lines and an outline that we had cut out. This is a simple step.

CARDBOARD

Secondly, you need to get some cardboard and past your cutout template on it. You'll end up needing to cutout the holes, that act as the 'lenses', again. Be careful doing this, you want to be as accurate as possible.

START FOLDING

googlecardbard.jpg
googlecardbard2.jpg
googlecardbard3.jpg
googlecardbard4.jpg
googlecardbard5.jpg
googlecardbard6.jpg

image 1: this is the shape you're working with

image 2: fold in the protruding bit, you should end up with a little triangle

image 3: fold it in carefully

image 4: the little triangle should be protruding

image 5: here is another view

image 6: fold in the corners

CONTINUE FOLDING

googlecardbard8.jpg
googlecardbard9.jpg
googlecardbard10.jpg
googlecardbard11.jpg
googlecardbard12.jpg

All the pieces should be stuck together, with tape, as indicated in the pictures above.

Fold the lower piece up and create a box at the lower section, as indicated.

LAST BIT OF FOLDING

googlecardbard14.jpg
googlecardbard15.jpg
googlecardbard16.jpg
googlecardbard18.jpg
googlecardbard19.jpg
googlecardbard20.jpg

You need to fold the box at the end and then fold it again and stick the edges in, so that the bit with the flaps sticking out makes up the lower section. The pictures explains it. You're then going to stick the flaps of the piece that has flaps down. The last piece you'll have will fold around the box and will need to be stuck on at the top, as the pictures indicate.

That's it! You've done it!