How to Make a Glowforge Windmill

This Is a homemade Windmill that will charge a light, a fan, or any other electricity using device.

You will need a Cardstock, Draftborad, and a motor.

You will cut the Blades from Cardstock. The Base and Stand will be cut out of Draftboard.

Stick the Stands(the things with long poles and a circle in the middle) In the base(draftboard square). Then attach the blades to the Motor. Stick your motor into the stands.

You can hot Glue the stand to the motor if you want more stability. You also can use a Solder Iron to connect a light bulb, fan, or other electricity things. NOTE: it will not charge Tablets, Phones, Watches, or any other electricity using devices.