How to Make a Fan With Little Bits Accesories Controller by a Slide Dimmer
by emills05 in Circuits > Electronics
2242 Views, 31 Favorites, 0 Comments
How to Make a Fan With Little Bits Accesories Controller by a Slide Dimmer

This is a fan controlller by a slide dimmer, in this case we're using a 9V battery for power , a button for control the display and the speed of the fan . This can use in a room , garage , anywhere.
Materials for This Project

The materials are:
9V battery
Power module
Light sensor module
Battery cable
Fan module
Display module
Mounting board
Elastic band
Connect the Battery to the Cable

We proceed to connect the battery of 9V for power the circuit.
Connect All the Modules




We proceed to connect the module power to turn on the circuit , then we connect the slide dimmer module to change the speed of the fan ,next we connect the display module and put it in count up to increase the speed , and if you put in count down to reduce the speed and finally connect the fan module.
Mount the Circuit to the Mounting Board

Once the board is mounted you can put ti on different ways of your choice, be creative!!!