How to Make a Fan With Little Bits Accesories Controller by a Button

by emills05 in Circuits > Electronics

603 Views, 3 Favorites, 0 Comments

How to Make a Fan With Little Bits Accesories Controller by a Button

DSC_1115.JPG

This is a fan controlller by a push button, in this case we're using a 9V battery for power , a button for control the display and the speed of the fan . This can use in a hot room.

Materials for This Project.

DSC_1117.JPG

The materials are:

  1. 9V battery
  2. Power module
  3. Button module
  4. Battery cable
  5. Fan module
  6. Display module
  7. Mounting board
  8. Elastic band

Connect the Battery to the Cable

DSC_1121.JPG

We proceed to connect the battery of 9V for power the circuit.

Connect All the Modules

DSC_1124.JPG
DSC_1125.JPG
DSC_1126.JPG
DSC_1128.JPG

We proceed to connect the module power to turn on the circuit , then we connect the button module to change the speed of the fan ,next we connect the display module and put it in count up to increase the speed , and if you put in count down to reduce the speed and finally connect the fan module.

Mount the Circuit to the Mounting Board

DSC_1129.JPG

Once the board is mounted you can put ti on different ways of your choice, be creative!!!