How to Make a Custom Lamp From Cd Spindle

by julio007madrid in Workshop > Lighting

1977 Views, 32 Favorites, 0 Comments

How to Make a Custom Lamp From Cd Spindle

WP_000088.jpg
WP_000085.jpg

Would you like to do whis awesome lamp from recycling you'll need this:

-Two different size cd spindles

-Black paper (Or any other color you like)

-Light bulb

-Cellophane (The color you would like your lamp)

-Some tools like scissors, glue and a knife

The Supplies

WP_000050.jpg
WP_000046.jpg
WP_000048.jpg
WP_000070.jpg

For the Bigger One

WP_000045.jpg
WP_000047.jpg

We'll take the middle part away for the bulb to pass trough

The Smaller One

WP_000049.jpg
WP_000052.jpg
WP_000053.jpg

We're going to mkae two holes one on the top that's the size of our bulb conector and a smaller one on the side for the cable

Let's Assemble the Lamp

WP_000054.jpg
WP_000055.jpg
WP_000056.jpg
WP_000057.jpg
WP_000058.jpg
WP_000059.jpg
WP_000060.jpg
WP_000061.jpg

Fort let's put the light bulb conector as shown on the pictures, and should look like the one on the end

The Design

WP_000062.jpg
WP_000063.jpg
WP_000064.jpg
WP_000065.jpg
WP_000066.jpg
WP_000067.jpg
WP_000068.jpg
WP_000069.jpg

Let's paste some black so it's the size of the cd spindle besides that to hide the upper part cut a circle so that it covers the top

The Design 2

WP_000077.jpg
WP_000080.jpg
WP_000081.jpg
WP_000083.jpg
WP_000084.jpg

Now cut your design in the black paper once it's already the right size and over it paste the cellophane and put it back again. You're done you