How to Make a Custom Axe

by thunderlaser-nolan in Workshop > Laser Cutting

15 Views, 1 Favorites, 0 Comments

How to Make a Custom Axe

coated metal red axe done.png

Let’s make your axe as tough and distinctive as you are! Laser marking can engrave your name or logo directly onto the metal head, ensuring your axe stands out on busy job sites and adds value for you or your customers.

Ready to give your axe the personalized edge it deserves? Follow the steps below and carve out your path to success!

Supplies

Machine Used

Aurora Lite 50W

Material Needed

Coated Metal Axe


Settings

  1. Laser Marking
  2. Speed: 2500mm/s
  3. Marking Power: 20%
  4. Frequency: 20kHz
  5. Line interval: 0.02

Place the Metal Axe

Put the metal axe on the laser bed. The metal axe is well suited for laser marking.

place coated metal red axe

Import Laser Marking File and Check Out

Load your design into LightBurn software, adjusting its size and position to fit your axe. Then make sure the laser marking parameters are set correctly.

coated metal red axe setting


Don't Miss the Focus

Missing the focus is one of the biggest reasons for laser marking failure. So don’t forget to click the AF button for auto focus.

Of course, manual focus is also effective. Hang the focal stick at the correct position under the lens, and then carefully adjust the Z-axis height. When the end of the focal stick just touches the surface of the axe, it is in focus!

Red light focus

Auto focus

focus ruler focus

Manual focus

aurora lite focal stick

Focal stick of manual focus

focus on coated metal red axe

Adjust the focus

Ready to Start Laser Marking

Press the frame button and check if the visual red light indicate the right area to be marked. The frame should be located in the correct position for the axe. If not, move the pattern positions until they align.

After checking, close the laser door and begin Aurora Lite’s operation.

framing and start

Monitor the Metal Axe Marking Process

Stay near the laser machine throughout operation to monitor for any unusual sounds or alarms. This door ensures safety during laser marking, as the energy is potent. Avoid looking directly at the laser beam, even with protective measures in place.

laser marking coated metal red axe

laser marking coated metal red axe 3


Complete the Laser Marking

Once laser marking is complete, carefully open the door and get your personalized candy box. Laser marking does not produce toxic substances, and you can use the axe after a simple cleaning!

Every swing of your axe becomes a signature statement when it’s laser marked. This personalized touch not only ensures your tool stands out on busy job sites but also prevents mix-ups by clearly displaying your name or logo.

Whether you’re an outdoorsman, woodworker, or DIY enthusiast, the seamless blend of durability and style offered by laser marking transforms your axe into both a practical tool and a unique statement piece. Elevate your craft with an axe that reflects your exceptional workmanship and sets you apart from the rest!

coated metal red axe done


coated metal red axe show