How to Make a Creeper's Head in Cardboard

Hello everyone, this video is for anyone who's bored in this quarantine time, and especially for who likes minecraft, this is the perfect occasion to put together those two things to create something that will decorate your room. If you think that this design is too small you are free to modify it making it bigger. I'm sorry for the watermark but that's what happens if you choose the free version of an editing software.

I hope you would enjoy it and good luck making it :).

-Green felt tip pens (at least 4 different green shades)

- Black felt tip pen

- Scissors

- Cardboard (at least 80x80 cm)

- Ruler (better if it's 30 or more cm long)

- Hot glue

This is how you will have to devide the cardboard with the black pen. THIS IS NOT THE LAST MEASUREMENT STEP, SO DON'T CUT THE CARDBOARD YET.

This is how you will have to devide each square, that's an 8x8 cm. So this means that at the end you should have 64 small squares for each big square, for a total of 384 small squares.

The first picture represents how the 2d part of this creeper's head should look like (before colouring it of course). On the second picture you can see how to make those small trapezoids that will be the point where the glue will be placed. You do not need to colour the trapezoids.

This picture shows you how a pattern of how to colour the creeper's head. IT'S NOT IMPORTANT HOW YOU COLOUR THE REST EXCEPT FOR THE FACE, THE BLACK PARTS OF THE FACE SHOULD BE THE SAME AS IT'S SHOWN IN THE PICTURE. Then you can colour it as you want.

This part is pretty easy, you will only have to cut the cardboard following the lines. You should be very careful and precise in this part, if you don't feel comfortable in using scissors call someone to help you.

For this part you should look at the video and just fold all the big squares and the trapezoids. Help yourself with a ruler to do this step.

Here you should apply the glue on every trapezoid and then following the video stick every part with its corresponding part. And then, after that just apply some power so that the glue will stick betterly and after that, your creeper's head is done, congratulations :)