How to Make a Cardboard Gernade
by benlsteawrt in Living > Toys & Games
285 Views, 2 Favorites, 0 Comments
How to Make a Cardboard Gernade
this is a instructable on how to make a cardboard grenade
Supplies
- cardboard
- Scissors
- Small Rubber band
- Pen
- Pin
- Key ring
- Toothpick
Arrange All Your Pieces
Cut Out Five Pieces in This Shape
Hot Glue the Pieces Into a Circle
This Is the Hard Part Bend the Tips in and Hot Glue Them Together Then Flip It Over and Repeat on the Other Side
Cut a Piece Perpendicular to the Ridges on the Cardboard About a Quarter Inch Wide by However Long Your Grenade Is
Pull the Top Layer of Cardboard Off Carefully
Hot Glue the Piece to the Grenade and Repeat Steps 4,5,6 Four More Times
Hot Glue a Square of Cardboard to the Top
Cut Off the Edges
Cut Lots of Little Squares Out of Cardboard
And Glue Them to the Grenade
Cut Three of These Pieces Out of Cardboard One Slightly Smaller Then the Other Two
Hot Glue the Smaller One to a Piece of Cardboard. That Is the Handle of the Grenade
Hot Glue the Two Bigger Pieces of Cardboard to the Grenade Like This
Slide the Handle in and Make a Hole Through All Three Pieces
Slide a Toothpick Through
Cut the Ends Off and Seal Them With Hot Glue
Take the Pin and Key Ring
Slide the Pin Into the Key Ring
Poke the Pin Into the Grenade
Cut the Rubber Band
Hot Glue the Rubber Band Like This So When You Pull the Pin the Handle Flies Up
Fill the Bottom of the Grenade With Chopped Up Pieces of Cardboard or Pop-its
Cut a Piece of Cardboard That Fits on the Bottom of the Grenade
