How to Make a Car With Little Bits Controller by a Light Sensor

by emills05 in Circuits > Electronics

3508 Views, 14 Favorites, 0 Comments

How to Make a Car With Little Bits Controller by a Light Sensor

DSC_1161.JPG

This is a fan controlller by a light sensor , in this case we're using a 9V battery for power , a light sensor for control the DC motor. This can use for kids that are tinkering and creative.

The Materials for This Project

DSC_1157.JPG

  1. The materials are:
  2. 9V battery
  3. Power module
  4. Battery cable
  5. Mounting board
  6. Elastic band
  7. Light sensor module
  8. DC motor module
  9. Fork
  10. Wheel(2)

Connect the Cable to the Battery of 9V

DSC_1121.JPG

We proceed to connect the battery of 9V for power the circuit.

Connect All the Modules

DSC_1124.JPG
DSC_1158.JPG
DSC_1159.JPG
DSC_1160.JPG

We proceed to connect the module power to turn on the circuit , then we connect the light sensor module that it´s configured in light sensitivity ,next we connect the fork for be able to connect more things , in this case two DC motor.

Mount the Circuit in the Board.

DSC_1161.JPG
Car with little bits

Once the board is mounted you can put it on different ways of your choice, be creative!!