How to Make a Bubble Machine With Little Bits

This is a bubble machine controlller by a push button, in this case we're using a 9V battery for power , a button for control the fan. This can use for kids tha like bubble.

The materials are:

1. 9V battery
2. Power module
3. Cable power
4. Button module
5. Cup or glass
6. Normal tape and tape two faces
7. Fan module
8. Board
9. Container

We proceed to connect the battery of 9V for power the circuit.

We proceed to connect the module power to turn on the circuit , then we connect the button module to turn on the fan , and finally the fan module.

Once the board is mounted you can put ti on different ways of your choice, be creative!!!, then we cut the bottom of the cup, and finally put the fan on the cup and hold with tape.

Once the board is mounted you can put ti on different ways of your choice, be creative!!!

We recomend that u have to make a nice mix to create a greate bubble.