How to Make a Boil 'n Go Cup on Tinkercad

Nothing is better than a hot drink during winter, right? Weather and time itself can be a bummer, the cold wind causing your delicious hot chocolate to turn yucky and cold. Luckily, we have a solution for such problem! Presenting the boil n go cup, a cup on which you can boil water and make deaily cup of coffee or tea, or even that instant noodle soup! The cup apart from boiling, is made with resistant material which preserves the temperature of whatever is inside of it no matter the changes of weather.

We have a beta design of this intelligent invention, on which YOU can make on tinkercad following these simple steps!

For this we are going to need two shapes; the half sphere and the torus.

We first double click the half sphere and place it on which our cup will be made. Next, we place the torus in a different possition, and double click it in order to change its shape a bit more to our liking. We low the radius of the torus down to 6.42, rise up the tube up to 2.5, the sides up to 23 and finally low the steps down to 15. Now, with this completed, we connect the torus on top of the half sphere. With this done, we have created about 70% of the boil and go cup.

Now with our base completed, we double click on another torus shape (make sure all shapes are of the same color). Next, we tilt se shape sideways and just like the other shapes, change the radius to 4.12, the tube to 33.4 and lastly sides and steps up to 24. Now with that finished, we connect the torus shape, either on the back or on the left side. The handle is that thick, because since our cup can boil and preserve the heat, the handle has a special funtion that avoids getting your hands burned.

One of the most remarkable features of the Boil n Go cup is the design marked on the front. The design marked is sacred and cant we changed. In order to get it done we double click on the 3d scribble, which is next to the 3d sphere. There, you will have the freedom to draw the shape of your liking. In this case, we draw a flame, and flatten down the shape so its not too thick.Next we copy and paste it two times more in the colors red, orange and yellow. And finally we place these on the front of our cup, on the order showed up in the pictures.

And your done! enjoy the first official beta design of the Boil n Go cup! A product which will sell everywhere for everyone in a possiblke near future, helping millions of people and their hot drinks/soups worldwide!