How to Make a Diy Cage

Today I am making a cage which is approx 12 inches from all sides ,it's compact size for birds and rabbit as well

if you don't understand something please watch the video and vote for this instructable

16 pieces of 12 " x 1.25 " wood

Wire net

1.5 inches nails

2 inches nails

Wood glue

thin wood for covering net

wooden board

Make 2 squares out of 4 wood pieces

Cover it with net wire with thin wooden pieces

Insert the two pieces inside the square by cutting them down on 3 inches apart leaving a center for door

cover the sides with net

Place wood piece on edges of the squares and hammer down the 2'' nails from the upper side make a cube same with door part

Cover all the sides with wire

The bottom dimension is 14'' by 14'' cut out the board and place it over the bottom and secure it with nails

Take a dimension it's 10.5'' cut out two pieces and place them inside the hole take other dimension between those two pieces and cut out 4'' of two pieces joint them as a rectangle size for the door and cover with net

Place the door knob on the door and put door hinges on the sides

our cage is complete for birds and small pets

if you don't understand something please watch the video and vote for this instructable